Coolant Tank Filtration Solutions!

The team at MP Systems have worked hard to engineer filtration solutions that will effectively eliminate your dirty coolant issues at the source. The filtration options we manufacture have been designed and tested to work even in the most demanding environments. Our systems are rated for continous duty and come with a 2 year parts warranty as well as live engineer support.

Cyclonic Debris Removal (CDR)


Removes fines and debris from high volume machines with filtering chip conveyors without needing to change filter bags. Works well with aluminum or cast iron. Filters based on particle density.  Runs simultaneous with your machine.  Each unit is dedicated to 1 machine and is not portable.  

Check out the Cyclonic Debris Removal System

Purge Filtration System


Keep your tank clear of fines and debris using high capacity filtration with the Purge. Works with a variety of materials. Filters based on particle size.  Works well with swiss machine tools. 

Check out the Purge Filtration System 

Sludge in Coolant Tank

What are symptoms of a dirty tank?

Have you ever needed to shut down your machine tool so you could clear out the debris in the sump? The hassle of not only throwing your time away, but having your machine down and not making parts is enough to look for a better solution.  Carefully reach to the bottom of your machine tool tank; If you have a debris problem, this is where you will uncover just how bad it really is. Here are some common symptoms of a dirty tank:

  • Clogged pumps
  • Chip dams at screens
  • Coolant starvation of flood & high pressure pumps
  • Clogged lines
  • Short coolant life
  • Smelly, bacteria-ridden coolant
  • Machine alarms including "low coolant" &  "pump motor overload"
  • Poor part finish
  • Short tool life

How much does a dirty coolant tank cost you?

Insert values to the estimator below to get a rough idea of what you are spending on your dirty coolant tank every year.

*The estimator does not account for increased tooling costs as a result from dirty coolant

**The estimator does not account for scrapped parts due to reasons surrounding dirt coolant

Coolant Filtration FAQ              

Let's answer some common questions we get about our coolant filtration units!

Yes. If you are cutting cast iron or aluminum at high volume and have sludge-like buildup in your coolant tank, our CDR is recommended for this application.  You must also have a working filtering conveyor for it to work properly.  

Coolant Filtration