Skip to content
MP-Systems.net
High & Medium Pressure Coolant Systems
high pressure dial icon

High Pressure Coolant Systems for Swiss Lathes

These coolant systems are generally recommended for use with Swiss Lathes.

v2-listing@2x_rebrand

This general purpose high pressure coolant system can be used on a variety of machines. It's compact enough to fit under a standard height bar feeder.

  • V2-O (Oil) system has a max pressure of 2000 psi and a 5 GPM flow rate.
  • V2-W (Water) system has a max pressure of 1000 psi and an 8 GPM flow rate.
rdh@2x_rebrand

Designed for use with machines that have restricted tank capacity, this system provides extra filtration and is the best solution for oil aeration problems.

  • RDH-O (Oil) system has a max pressure of 2000 psi and a 5 GPM flow rate.
  • RDH-W (Water) system has a max pressure of 1000 psi and an 8 GPM flow rate.
s2-listing@2x_rebrand

With its 18,000 BTU built-in chiller, the S2 system provides the thermal stability needed to machine high volume, high precision parts.

  • S2-O (Oil) system has a max pressure of 2000 psi and a 5 GPM flow rate.
  • S2-W (Water) system has a max pressure of 1000 psi and an 8 GPM flow rate.