THE BENEFITS OF HIGH PRESSURE
Flood and low pressure coolant are unable to break the vapor barrier at the cutting zone - trapping heat within the workpiece and tooling. MP Systems’ high pressure coolant systems break this barrier by delivering up to 1,000 PSI directly to the tool’s cutting edge. The result is effective cooling, lubricating and chip evacuation for longer tool life, better part quality, and faster cycle times.
COOLING
Removes heat at the source.
High pressure coolant penetrates the vapor barrier and removes heat from the cutting edge and workpiece.
- Higher speeds & feeds
- Longer tool life
- Less thermal damage
- Better part accuracy
LUBRICATION
Protects the tool and workpiece.
Coolant reaches the cutting interface before it can evaporate, allowing the coolant to reduce friction and wear.
- Higher speeds & feeds
- Longer tool life
- Less thermal damage
- Better part accuracy
CHIP EVACUATION
Flushes chips away rapidly.
High pressure blasts chips from cutting zone, preventing re-cutting and minimizing cycle times.
- Higher speeds & feeds
- Longer tool life
- Less thermal damage
- Better part accuracy
MILLS & LATHES
The UL Series is a basic system designed for use in these operations:
- OD & ID turning operations on free cutting materials
- Shallow hole drilling
- Light duty applications
MACHINE USE:
Mills / Lathes
MAX PRESSURE / GPM
250 PSI / 12GPM
FEATURES
208/230V(480V Avail)
Water Based Coolants Only
Single Port Only
1-Year Parts Warranty
FILTRATION
Single Filter Vessel
7x32' 5 Micron Quick Change Bag
PLC DISPLAY
Yes
Designed to operate in harsh environments that demand high pressure with minimal maintenance.
- OD & ID turning operations on all materials
- Deep hole drilling
- Pocket milling
- Abrasive duty option available
- Chiller option for high precision applications
MACHINE USE:
Mills / Lathes
MAX PRESSURE /GPM
3000 PSI / 16GPM
FEATURES
50 Gallon Reservoir (70 Gal avail.)
208/230V (480V avail.)
Water based coolant or suitable oils
Up to 8 ports available
2 Year Parts Warranty
FILTRATION
Dual Filter Vessel
(2)7x32' 5 Micron Quick Change Bags
PLC DISPLAY
Yes
Allows for full advantage to be taken of the flexibility and range of capabilities found in very sophisticated machine tools.
- OD & ID turning operations on all materials
- Deep hole drilling
- Pocket milling
- Thermal stability
- Abrasive duty option available
- Maximum performance for a variety of tooling sizes and requirements
MACHINE USE:
Mills / Lathes
MAX PRESSURE / GPM
250 PSI / 12GPM
FEATURES
208/230V(480V Avail)
Water Based Coolants Only
Single Port Only
1-Year Parts Warranty
FILTRATION
Single Filter Vessel
7x32' 5 Micron Quick Change Bag
PLC DISPLAY
Yes
MACHINE USE:
Mills / Lathes
MAX PRESSURE /GPM
3000 PSI / 16GPM
FEATURES
50 Gallon Reservoir (70 Gal avail.)
208/230V (480V avail.)
Water based coolant or suitable oils
Up to 8 ports available
2 Year Parts Warranty
FILTRATION
Dual Filter Vessel
(2)7x32' 5 Micron Quick Change Bags
PLC DISPLAY
Yes
MACHINE USE:
Mills / Lathes
MAX PRESSURE /GPM
3000 PSI / 20GPM
FEATURES
Variable volume range
50 Gallon Reservoir (70 Gal avail.)
208/230V (480V avail.)
Water based coolant or suitable oils
Up to 8 ports available
2 Year Parts Warranty
FILTRATION
Dual Filter Vessel
(2)7x32' 5 Micron Quick Change Bags
PLC DISPLAY
Yes
SWISS MACHINING
Designed for use in multi-tool Swiss lathe environments that demand optimal chip control and complicated machining operations.
- Optimal chip control
- Permit otherwise impossible machining operations including thru coolant deep hole and gun drilling
- Allow faster cycle times and longer tool life
- Improve coolant filtration
MACHINE USE:
Lathes
MAX PRESSURE / GPM
8GPM,1000PSI - Water based coolant
5GPM, 2000PSI - Oil
FILTRATION
Single Filter Vessel
FEATURES
Available 8 port remote valve blocks
Built in feed/supply pumps
Optional 15,000 BTU Chiller
2 year parts warranty
PLC DISPLAY
Yes
Ideal for operations where optimal temperature control and migration of thermal growth is critical. Designed to fit tightly within packed Swiss machining environments.
- Temperature control and migration of thermal growth is critical to a machining process
- The use of a coolant chiller is needed to provide the level of thermal stability required to machine high volume high precision parts
- Space is limited in tightly packed Swiss machine environments
MACHINE USE:
Lathes
MAX PRESSURE / GPM
8GPM, 1000PSI - Water based coolant
5 GPM, 2000PSI - Oil
FILTRATION
Single Filter Vessel
FEATURES
Built in 18,000 BTU chiller
Ambient temperature tracking
8 ports available
Built in feed/supply pump
2 year parts warranty
PLC DISPLAY
Yes
The best solution for machines with oil aeration issues and limited tank capacities. Provides additional filtration capacity and optimal chip control.
- Best solution for oil aeration problems
- Designed for use with machines that have restricted tank capacity
- Provides additional filtration capacity
- Optimal chip control
- Allow faster cycle times and longer tool life
MACHINE USE:
Lathes
MAX PRESSURE / GPM
8GPM,1000PSI - Water based coolant
5GPM, 2000PSI - Oil
FILTRATION
Single Filter Vessel
FEATURES
Available 8 port remote valve blocks
Built in feed/supply pumps
Optional 15,000 BTU Chiller
2 year parts warranty
PLC DISPLAY
Yes
MACHINE USE:
Lathes
MAX PRESSURE / GPM
8GPM, 1000PSI - Water based coolant
5 GPM, 2000PSI - Oil
FILTRATION
Single Filter Vessel
FEATURES
Built in 18,000 BTU chiller
Ambient temperature tracking
8 ports available
Built in feed/supply pump
2 year parts warranty
PLC DISPLAY
Yes
MACHINE USE:
Lathes
MAX PRESSURE / GPM
8GPM, 1000PSI - Water based coolant
5 GPM, 2000PSI - Oil
FILTRATION
Dual Filter Vessels
FEATURES
50 Gallon reservoir
De-aeration feature
Built in heat exchanger
8 ports available
2 year parts warranty
PLC DISPLAY
Yes